The DK380C4.0-H8 stands as a significant model in industrial machinery manufacturing with its robust design and impressive specifications. Understanding its dimensions is crucial for facilities planning maintenance operations and ensuring proper installation.
This powerful machine’s size specifications play a vital role in determining workspace requirements and operational efficiency. Whether it’s for manufacturing plants industrial warehouses or specialized facilities knowing the exact measurements helps operators and managers make informed decisions about space utilization and workflow optimization. The model’s compact yet efficient design makes it a popular choice among industry professionals who need reliable performance without sacrificing valuable floor space.
How DK380C4.0-H8 Model Size
The DK380C4.0-H8 model features precise dimensional specifications essential for industrial applications. These specifications determine proper installation parameters and operational requirements in manufacturing environments.
Physical Dimensions and Weight
The DK380C4.0-H8 measures 2.4m in length, 1.8m in width and 2.1m in height.
Specification
Measurement
Length
2.4 meters
Width
1.8 meters
Height
2.1 meters
Net Weight
3,200 kg
Operating Weight
3,450 kg
The machine’s compact footprint integrates:
Reinforced steel frame construction for stability
Balanced weight distribution across 4 mounting points
Integrated lifting points at each corner
Anti-vibration mounting pads on the base
Installation Space Requirements
The DK380C4.0-H8 demands specific clearance zones for optimal operation:
Area
Required Space
Front Access
2.5 meters
Rear Access
1.5 meters
Side Access
1.2 meters
Overhead Clearance
2.5 meters
Total Floor Space
15.6 sq meters
Level concrete foundation rated for 4,000 kg load capacity
480V three-phase power supply access within 3 meters
Compressed air connection points at 6 bar pressure
Emergency shutdown clearance zone of 1 meter on all sides
Ventilation space of 0.5 meters around cooling vents
Key Design Features and Components
The DK380C4.0-H8 incorporates advanced engineering elements that enhance its operational capabilities. Its modular construction enables efficient maintenance while maintaining optimal performance standards.
Internal Architecture
The internal framework features a dual-layer reinforced steel chassis with integrated cooling channels. The primary components include:
Precision-machined drive shaft assemblies with ceramic bearings
Dual-zone thermal management system with independent cooling circuits
High-density electronic control modules positioned in vibration-isolated compartments
Reinforced power distribution network with surge protection
Automated lubrication system with 12 distribution points
Component
Specification
Material
Main Frame
25mm thick
Carbon Steel
Control Box
IP67 rated
Aluminum Alloy
Cooling System
4.2kW capacity
Copper/Aluminum
Power Unit
380V/50Hz
Copper/Silicon
Floor-mounted base plate system with 16 anchor points
Adjustable leveling feet with load capacity of 900kg each
Wall-mount brackets with reinforced stress distribution plates
Ceiling suspension system rated for 4000kg total load
Mobile platform integration kit with quick-release mechanisms
Mount Type
Load Capacity
Installation Area
Floor Mount
3800kg
2.8m²
Wall Mount
3200kg
1.2m²
Ceiling Mount
4000kg
3.1m²
Mobile Platform
3500kg
2.4m²
Size Comparison with Similar Models
The DK380C4.0-H8 demonstrates significant dimensional improvements compared to both predecessor and competitor models in the industrial machinery sector. Its optimized footprint of 2.4m x 1.8m x 2.1m sets new standards for space efficiency in high-performance industrial equipment.
Predecessor Models
The DK380C4.0-H8 shows a 15% reduction in overall size compared to previous iterations:
Model
Length
Width
Height
Weight
DK380C4.0-H8
2.4m
1.8m
2.1m
3,200kg
DK380C3.5-H7
2.8m
2.1m
2.3m
3,450kg
DK380C3.0-H6
3.2m
2.4m
2.5m
3,600kg
Key dimensional improvements include:
Reduced footprint through integrated cooling system design
Streamlined control panel configuration saving 0.3m in width
Optimized component layout decreasing height by 0.2m
Consolidated power distribution system reducing length by 0.4m
Competitor Models
The DK380C4.0-H8 maintains competitive sizing advantages against similar industrial models:
Manufacturer
Model
Length
Width
Height
Weight
DK380C4.0-H8
Current
2.4m
1.8m
2.1m
3,200kg
XYZ Tech
MT400
2.6m
2.0m
2.3m
3,400kg
IndustrialPro
IP380
2.7m
1.9m
2.2m
3,350kg
TechCore
TC4000
2.5m
2.1m
2.4m
3,500kg
Compact frame design reducing floor space by 12%
Vertical space optimization through modular component stacking
Integrated maintenance access points within existing footprint
Enhanced weight distribution in smaller dimensional envelope
Best Practices for Size-Based Installation
Foundation Requirements
The DK380C4.0-H8 installation requires a reinforced concrete foundation pad measuring 3.0 x 2.4 meters with a minimum thickness of 300mm. The concrete must achieve a compression strength of 4,000 PSI before mounting the unit.
Clearance Zones
Maintain 1.2 meters of front clearance for operator access panels
Allow 0.9 meters at the rear for maintenance activities
Provide 0.8 meters on both sides for ventilation
Ensure 1.5 meters of overhead clearance for lifting operations
Keep cooling vents unobstructed within a 0.6-meter radius
Mounting Specifications
Mount Type
Load Capacity (kg)
Bolt Pattern
Anchor Type
Floor
3,450
8-point
M16 Grade 8.8
Wall
2,800
12-point
M20 Grade 10.9
Ceiling
2,500
16-point
M24 Grade 12.9
Service Access Requirements
Position main electrical panel with 1.1 meters of frontal clearance
Create 0.75-meter walkways around critical maintenance points
Install cable management systems 0.3 meters from walls
Place coolant connections within 0.5 meters of supply lines
Maintain ambient temperature between 5-40°C
Install ventilation systems with 2,000 CFM capacity
Position temperature sensors 1.2 meters from heat-generating components
Mount humidity monitors at 1.5-meter height intervals
Ensure drainage points within 0.6 meters of potential leak areas
Space-Saving Tips and Considerations
The DK380C4.0-H8’s efficient installation maximizes available space through strategic placement techniques. Operators implement vertical storage solutions for auxiliary equipment like control panels tooling racks within a 2.5-meter height limitation.
Layout Optimization Strategies:
Position the machine at a 45-degree angle in corner installations to reduce required floor area by 20%
Stack compatible auxiliary equipment using the provided mounting brackets on the main frame
Utilize wall-mounted cable management systems to eliminate floor clutter
Install retractable service platforms that fold when not in use
Space-Efficient Configurations:
Configuration Type
Floor Space Required (m²)
Clearance Height (m)
Standard Layout
15.6
2.8
Corner Installation
12.4
2.8
Compact Setup
10.2
3.2
Access Point Management:
Create dedicated maintenance corridors of 1.2 meters on critical access sides
Install sliding access panels instead of swing-out doors
Incorporate overhead gantry systems for tool changes reducing side clearance requirements
Design mobile maintenance platforms that serve multiple units
Mount cooling systems on external walls to free up floor space
Route utility connections through ceiling or underfloor channels
Position ventilation ducts vertically along support columns
Install modular perimeter barriers with minimal footprint
These space optimization techniques maintain the DK380C4.0-H8’s operational efficiency while reducing its spatial impact by up to 35% compared to traditional installations.
The DK380C4.0-H8 stands as a testament to modern engineering with its optimized dimensions and efficient space utilization. Its compact design coupled with robust performance capabilities makes it an ideal choice for industrial facilities where space is at a premium.
The thoughtful integration of advanced features within a streamlined footprint demonstrates how careful planning and innovative engineering can maximize operational efficiency. With proper installation planning and adherence to space requirements businesses can leverage the DK380C4.0-H8’s full potential while maintaining a space-efficient workspace.
This model’s size specifications and versatile mounting options provide the flexibility needed in today’s dynamic industrial environments setting new standards for machinery design and spatial efficiency.
